2001 Honda Accord emissions problems with OBD2 codes?
Have a 2001 Honda Accord, 4-cylinder version with 275k miles. Trying to pass emissions, and I'm getting these OBD-2 codes:
P0113, P1519, P700, and P780.
Suggestions on how to fix these would be great.
http://www.obd-codes.com
You can find those codes here and any possible fixes.
- OBD1 cylinder head on OBD2 block? So I have a 97 Honda Accord with the F22b2 motor, it is obd2. Can I swap out my head for the F22b6 head from a 95 Odyssey that is obd1, and not have to worry about any rewiring or cutting or creating electricial problems down the road. Is it just plug and play or do minor modifications need to be made to get it to perform properly?
- Honda misfire codes 2001 civic, three of 4 cylinders and random misfire any idea? Car actually runs fairly good but I see the misfire come on while driving I checked compression, seems fine all cylinders new plugs, new air filter, cleaned throttle assembly checked by pulling spark plugs one time no dead cylinder gross check on injectors didn't see anything two cans of injector cleaner 1 can seafoam in gas tank changed oil any good suggestions?
- I'm having problems with my 2001 Honda Accord when I started up makes this whining Noise? The car has 215,000 miles on it but still runs okay recently I had the Axle replace now it need a transmission the reverse works fine but the drive hesitate shift to drive and get going what should i do Help! I don't what want trash the car because still starts up And runs fine was thinking about putting lucas oil transmission fix
- Codes P0302, P0304, P0300, and P1399 (misfires) on a 2000 Honda Accord 4 cylinders? I checked the spark plugs and cylinders 2 and 4 seems to be not tight enough. This may be the cause. But does a blown head gasket also causes these errors? I read somewhere that codes P030x on adjacent cylinders usually indicator a blown head gasket. In this case the two cylinders are not adjacent. I cleared the codes after tightening the two spark plugs and drove the car around the block and no error code so far. But this worries me a bit if the problem is more serious.