CB unicorn won't start after connecting the battery?

Hi
I'm using honda unicorn 1 year old. I'm facing strange problem. My bike won't start after connecting the battery. Battery seems to be ok. As soon as I remove the battery, my bike is starting in one kick. It's headlight & other indicators are working properly. But if the battery is connected it won't start at all… Even not by kick also… When i connected the battery its indicators stop working. They are dead… Is there any problem in electrical wring or do I have to replace the battery?

A you connecting it correctly?

You have connected the battery improperly and BLOWN the Main fuse. (just's just outside the battery box on the Red(+)-Pos. Lead).

Check the amperage on the fuse and replace with a new one. Disconnect the battery leads, relace the Main fuse and while reconnecting the battery lead do the Red(+)-Pos first and than the Black(-)-Neg last.

Since you say you know how to check fuses, you have a dmm… So, like, use it to figure out the problem. It ain't rocket science. You don't even mention the no-load (disconnected) voltage of the battery. Why not? Take the battery somewhere that can do a load test. Have you ever added distilled water to the battery? Is it an AGM battery? Do you have a good motorcycle battery charger? The battery is fairly new, but it could be internally shorted, especially if you have NEVER performed any maintenance on it. Might be a defective battery. This is an opportunity for you to learn about batteries and how to maintain them, dude. Volts is volts… Even in India.