My 2000 honda d16y7 is only making 30 psi when compressing is that bad? I probably need a new engine right?
My 2000 honda d16y7 is only making 30 psi when compressing is that bad?
i probably need a new engine right?
Do a compression leak down test, you may need to have the cylinder head service for bent valves. What has happened? Broken timing belt?
- Do I need to only start the 2008 CBR600RR or do I need to operate and ride the 2008 Honda CBR600RR super sport to destinations? I was wondering about during times when the 2008 Honda CBR600RR super sport motorcycle is in storage, especially during cold winter temperatures.
- Why could my 2000 Honda Civic show it's going to overheat I have coolant a new radiator a new radiator cap a new temp gauge switch and? A new thermostat head gasket is fine could it just need to flushed and a new water pump and timing belt
- Right Headlight went out. I replaced both with 6k hid lights. Hid kit components are all brand new. Right headlight still didn't turn on? It's 91 Honda Civic sedan. Every other light works except that one headlight that isn't turning on as if it wasn't getting any current or something. High beams don't turn it on either.
- 96 civic engine (D16Y7) knocking. Bearings and rods in good shape? What can be causing the knockings? The knocking sounds like if the engine spun a bearing and if the rod was the one causing the knock although it's NOT as loud, BUT the bearings and rods are in good shape, bearings look new…, can the head or something else cause the knocking noise? I've checked the head and it look good, no signs of valve piston contact or bent valves. I'll be takin the head apart to verify everything is good. Edit, honda is automatic