What, if any, needs to be replaced when you change upper control arm?
(suspension? Steering?) wheel + right front damage to 1990 honda accord
Check the axels and CV joints for any damage and if there are replace immediately, check out the wheel bearings, bushings for the arms, and check out the shocks and springs.
Nothing more just change what's broken/bent.
- 03 honda pilot GRV valve sensor needs to be replaced and now VITM-4 light just went on.is it safe to drive? Do I need to tow it to Honda or can I drive it. Honda is a mile away from home. Can I drive short distances without hurting engine? light for GRV valve sensor has been on for two weeks and the VITM-4 light has just went on.
- Won't start not sure if water pump needs replacing or needs new engine? 2004 Honda civic DX 1.7L engine 155k? My car won't start i had to press the gas really hard to get it going before but now it started smoking(white) from under the hood and smelling burnt every time we try and start it up. I saw leaking under the car. Probably the coolant because its blue. Not sure if a new water pump and timing belt would do the job and or if we need to swap the entire engine. Before this I noticed that the engine would get hot or shut off whenever we stopped moving and finally this happened.
- Will polyurethane control arm bushing give my car better handling? For a 2003 Honda Element awd https://www.powerflexusa.com/shop/product/pff25-302-honda-civic-cr-v-element-front-control-arm-rear-bushing-1295 Also is kyb struts just as good as stock or better?
- How to take off upper control arm? The car is a 1999 honda civic si. I lowered the car and finally bought some camber kit to replace the stock. I removed all the nuts. Problem is the upper control arm base seem to be stuck. It won't budge. I tried lifting it a couple of times.