How to reattach the front bumper of a 2001 Honda Civic?
I have a 2001 Honda Civic EU Hatch which I've managed to dislodge the right hand side of the bumper when I was reversing out of a car space with a semi-flattened bollard in the way.
It looks like it should just easily 'snap' back into place but having never done so before, I'm not sure how to make it go back in.
The left hand side is fine, as are both headlights so I don't think there's too much damage from it.
Can I just push it back into place? Do I need screws or a mechanic?
I've got someone who can come and take a look but I'd like to try and figure it out myself first.
Step 1) remove the phillips screw that is still attached (on fender) Step 2) get some glass cleaner and spray the bumper where it has to snap back in. Step 3) push bumper back into place (may require smacking it) Step 4) re-attach phillip screw (may need washer (not a big deal if you don't have one) as the bumper has damage when the screw hole is. Step 5) sit on the couch and relax after accomplishing this.
Well you have the top hole which is where a screw or fastener to some sort held it. If it was a screw it is most likely still in there just not attached to anything so the simple fix without having to remake the tap would be a washer on the screw to hold it tighter. To get to the skrew you will probably have to take off the plastic guard on the inner fender that is held in with clips. Or maybe its open access but the other slots look fine and they are just a slide and pop in kinda thing.
From the picture it appears you may have only disconnected the plastic fasteners. I bet you may indeed be able to "snap" it back in place if the fasteners were not broken. You should be able to reach under the bumper to see if they are still intact.
- About how much would it cost to repair the front bumper on my car? The right side of the bumper on my 2003 Honda Pilot was hit today and it's a bit dented in along with what appears to be scratches perhaps. Like, they're these streaks of white paint on them that I think might also be scratches. Would I have to replace the entire bumper or can that be fixed by itself?
- Does Honda Dio stainless steel guard kit come with a front bumper guard? Yesterday I've bought a Honda Dio scooter along with the stainless steel guard kit. But I found that there's no guard for the front bumper. Can somebody please let me know whether it comes with a front bumper guard or not?
- Would v6 Honda Accord 1998 front bumper fit on a 4 cylinder Honda Accord 1998? I have a 1998 4 cylinder honda accord. If i purchase a 6 cylinder bumper would it fit? i'm trying to purchase this one. http://www.amazon.com/..._pC_nS_ttl
- Will this front bumper cover fit my car? I have a 2000 Honda Accord coupe, and I pulled it into my garage to work on it, and I bumped into a wall and cracked my front bumper cover. I've been looking and found a few for less than $40 but on the fitnote, it says Sedan. Since my car is a coupe would it fit just the same?