My car won't start but when I try to start it, it sounds like a power drill?
I have a 95 Honda Civic and it does not start it keeps making a noise that sounds like a power drill spinning. I have no idea what it is or could be any more. I've pulled the starter and put in a new one and the starter is still not catching the fly wheel. I have even resorted to charging the battery, checking all fluids (transmission, antifreeze, etc.) and putting in 5 gallons of gas but still nothing, can't pay to get it to a shop. Anything helps thanks.
Starter drive gear is not engaging ring gear on flywheel/flexplate. Check solenoid to starter, and inspect teeth on flywheel. If worn, ring gear has to be replaced.
Did you replace the started bendix?
If it's not the starter, or the flywheel or the bendix or the solenoid, you Might have broken the timing belt and the whole engine is not turning? Check the timing belt.
The teeth on the flywheel are worn off. Turn the engine front pulley a little and try again.
I was driving my car when I heard a ticking sound I stopped at a gas station to put gas when I turned it on ti leave the car moved 5 feet and turned off I tried to turn it on but only got a drill noise I changed to started I changed to alternator and the battery same thing happens does anyone know what can it be
- How does Honda Cbr 125 (Original) sounds like? If it sounds like one of those squeaky scotter/moped ones I ll rather wait till 18 years to get a 250/300 cc bike
- Have a 09 Honda 100cc dirtbike and it sounds bogged down and won't go very fast? I was riding and I accidentally downshifted. White smoke then came out of the exhaust and now it just sounds bogged down and won't go very fast at all.
- I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect? I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect. I did a compressin test, the pull start only gets the mower to 60psi but the drill gets the mower to 150psi. This mower does have a decompression vale where the ehaust opest about 1/8 of the way. I tore the ead off and checked and cleaned the valves. They don't stick open. Could there be an issue with the decompression valve? Or would it be the piston rings?
- I got a challenger sxt v6 deleted the mufflers and it sounds raspy like a honda? I recently deleted my mufflers on my v6 2015 challenger and it sounds too high pitched like a pop can. I have a cold air intake I'm going to install. Will that help make it a little deeper tone? Also will adding long tube headers help make it deeper? Any help is appreciated