My Honda 2012 Civic EX won't start?

My Honda 2012 Civic EX won't start, No lights working including headlight etc. Even after trying to Jump start with another Vehicle it does not work. It has half tank fuel a day before it stopped working but now tank fuel indicator is blinking sometimes. Indicator like ABS, TMPS etc are also blinking

Have you even looked at the battery terminals to see if they are tight and not corroded? Maybe a main fuse blew in the engine bay fuse panel.

  • My 2012 Honda CBR250 motorcycle won't start. Video link included? So I previously posted this question but lacked sufficient information, so I'm reposting with a video link depicting the sound the bike is making. At first I thought the battery was dead, so I go a new battery, and the bike still won't start. It has 250 miles on it but hasn't been ridden in about 9 months. I took the side panels off to see if there was anything obstructing air intake, nothing observed. All suggestions are welcome.
  • My 1983 Honda nighthawk 650 won't start with the electric start? I recently replaced the ignition coils because the old ones were getting heat soaked and the bike would die, however now the bike won't start with the electric start it turns over fin and the starter sounds fine but it won't start occasionally it ll start when it's cold or try to but I've been having to bump start it in order to ride it. So what's making it do this? Could it be the kill switch? Or something else?
  • I have a Honda HRX217 push mower. Backfired when trying to start it, now it won't start? It was running, then I shut it off to open and close a gate, and when I went to start it again there was a really loud backfire and now it won't start. It will sound like it's almost about to start but not. Then get progressively weaker each pull. I changed the spark plug and cleaned the air filter. Any ideas?
  • I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect? I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect. I did a compressin test, the pull start only gets the mower to 60psi but the drill gets the mower to 150psi. This mower does have a decompression vale where the ehaust opest about 1/8 of the way. I tore the ead off and checked and cleaned the valves. They don't stick open. Could there be an issue with the decompression valve? Or would it be the piston rings?

Add Comment