How to bleed the air out of my f22a1 Honda prelude?
So i changed the radiator yesterday and i want to put the coolant in. Question is what are the steps to properly do this?
Turn the heater to the hot position. Pour in a 50/50 mix of the correct antifreeze and distilled water. Do not use tap water. Fill the radiator to the top and leave the cap off. Wait for all air to escape. Start the engine and watch for air bubbles escaping from the radiator. Make sure you run it long enough for it to reach full operating temperature so the thermostat will open and all the air in the heater core will escape. KEEP THE RADIATOR FULL AT All TIMES. You may have bleeder valves on the upper part of the engine somewhere. Look closely for them. If you do find them turn those to release trapped air from the system. If not just keep watching the radiator and when you see no more air bubbles escaping from the radiator put the cap back on and shut the engine off. Drive it around for a few miles and repeat the process to make sure all trapped air has been purged from the system.
- Will advance auto bleed my hydraulic clutch and refill it? I have a 1984 Honda magna and I was told there's air in the hydraulic line and I don't know how to bleed them I'm just wondering if advance auto can bleed and refill my line. P.s I'm leaving for a road trip in 8 hrs and really need it done
- What is the deference between a 1990 Honda prelude and a 1991 Honda prelude? Can I do a motor swap with my 1990 Honda Prelude with a 1991 Honda prelude? Both are b21a1 2.05L engines
- Is the AEM V2 cold air intake worth it for my 97 honda prelude? So i'm thinking of buying a cold air intake and i've heard the v2 is a really good one. Is it worth the money? How much and what would i gain from it? Just basically need to know details and all that stuff. Thankz a lot guys
- I have a 2015 Honda rancher that had a crack in the air box. It got so much dirt through the air filter it got into my piston. So it now Burns oil and I was wonder will it ever stop smoking. I know I have to rebuild the engin so don't even say it. And how long will it take before it losses power.