I need help with my cbf125?
Ok so i have a 2012 honda cbf125. I've done a few bits and bobs to it to make it faster but i cleaned the throttle body out the other day and realised something on there that can be adjusted. I'm not sure if its the air temperature sensor but its like a tube that goes all the way through the throttle body with a sensor on one end. But on one side it has a little silver bracket with 3 slotts. The sensor can be rotated to sit in either 1 of these 3 slotts. Anyone have any idea what it is?
Could be an idle speed setting. Get a service manual for your bike if you want to mess with it. If the bike is fuel injected, it is better left alone. You need a scanner to work on it.
- I need help! Project integra I have a 96 honda integra and i need to change the valvle cover gasket which screws do i unscrew and what do i disconnect to take the cover off please be detailed
- Need help Honda Civic D16Z6 P28 a02 wiring? The B1 pin on my Ecu was burnt out, and the guy who had the car before me had it wired to ground. When I look online, I find multiple different answers as to what this pin is supposed to be for, either igp ground or sometimes igp power from the main relay, which are complete opposite. Just need help figuring out why this burnt out and if it is actually supposed to be connected to ground. It is a 95 civic 2 door 5 speed with the d16z6.
- Need help getting a scratch out of my glove box door? 2012 Honda civic has a big scratch in the vinyl glove box door. My co worker must have had something on the side of his backpack that dug into it unintentionally.
- I need help identifying my Honda Civic lx 5 speed man transmission, 2 door coupe, Factory spoiler, Grey cloth seats, Papers say 02 but can't find a pic of he car anywhere stock online. Is this v tech? No sun or moon roof