Why won't my Honda Goldwing start?

I've got the key in the ignition, the bike in nueteral, the lights come on, but when I press the starter button nothing happens.

Pull in the clutch. When it starts bring it in to have the safety switch looked at.

  • Why won't my honda crf70 start up? Long story short I bought it and it has compression it acts like it wants to start up but doesn't. I haven't cleaned the carb or changed the spark plug. The previous owner said he rode it two weeks ago blah blah. I did notice that one wire sleeve that holds two wires green and black were cut. The kill switch isn't cut but two of these wires are. Is this why it won't start up? Just need some suggestions
  • My 1983 Honda nighthawk 650 won't start with the electric start? I recently replaced the ignition coils because the old ones were getting heat soaked and the bike would die, however now the bike won't start with the electric start it turns over fin and the starter sounds fine but it won't start occasionally it ll start when it's cold or try to but I've been having to bump start it in order to ride it. So what's making it do this? Could it be the kill switch? Or something else?
  • I have a Honda HRX217 push mower. Backfired when trying to start it, now it won't start? It was running, then I shut it off to open and close a gate, and when I went to start it again there was a really loud backfire and now it won't start. It will sound like it's almost about to start but not. Then get progressively weaker each pull. I changed the spark plug and cleaned the air filter. Any ideas?
  • I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect? I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect. I did a compressin test, the pull start only gets the mower to 60psi but the drill gets the mower to 150psi. This mower does have a decompression vale where the ehaust opest about 1/8 of the way. I tore the ead off and checked and cleaned the valves. They don't stick open. Could there be an issue with the decompression valve? Or would it be the piston rings?

Add Comment