Why is my clutch pedal staying on the floor and doesn't spring back up?
I have a 92 Honda Prelude Si and I just changed the clutch on it. But now my clutch pedal has no pressure, I'll press the pedal and the pedal will stay down but won't spring back up at all. I already changed the Slave Cylinder. What's going on?
Have you checked the fluid in the clutch booster on the firewall? Have you checked the clutch booster for leaks? How many pressure plates and clutch discs have you had to replace in your 22 year old car?
You changed the slave cylinder. Did it get bled? I suspect air in system or it was not installed properly or clutch master cylinder is at fault. What about that rod that goes from the slave cylinder to the clutch itself?
I don't know.
- My Honda S2000 Clutch pedal thumps as I press down on it as if it gets stuck for a quick second. Why? I think it got worse, not when I try to Press all the way down on the gas on the free way to go fast, the RPMs shoot way faster and the MPH moves very very slowly? Any ideas?
- Brake lever doesn't spring back on old motorcycle? I have a 1980 honda cm200 I took off the wheel once to paint the rims and when I put it back on the front brake stopped working when I apply the brake and release it the lever does not returned to it's original position how do I fix this
- Why does my AC fan and compressor clutch stay on and never cycles on and off when i have the AC ON? 2010 honda civic. Recently replaced the compressor because it was shot and i also have the right amount of refrigerant
- Honda civic 97 isn't staying on after 2nd gear and turns off? So I start my car holding the clutch I change out of first gear into 2nd gear and still keeps running, but right after the car shakes and turns off. My clutch isn't burnt out I ensured there was no pop or smoke so I don't know what may be causing this. Any suggestions? Please it would really help.