2001 honda civic sedan one button on master power window switch does not work. Repair?
The button that controls the front passenger window will not work from drivers master switch i replaced it with a new master switch after market but problem still exsist. If you use the button on the front passenger door the window will go up and down. What could the problem be. Could it be the connection plug to the master switch? The other 3 buttons will work on switch.
Yes, usually it is the master switch, but in your case. Looks like its just the connection. You can try jumping it there with a piece of wire, then you'll know for certain.
- 2001 honda civic lx master power window switch problem with one of the window buttons? The power button on the drivers side to lower the front passengers window will not work. But the power window switch for the front passenger if you sit on the passenger side will work and lower window. Could this be the master switch problem or a wiring problem. All of the other buttons on the master switch work to lower windows on the rear left and right windows and front drivers window. Of the 4 buttons on the master switch 4 work and 1 does not.
- 2001 civic ECU blown. Is this junkyard one compatible since I can't find one with exact matching numbers? ECU in my 2001 civic blew because the alternator bolt wasn't completely tightened after timing belt job. Old ECU numbers is 37820-PLR-C53 (2001 civic ex auto Vtec) Junkyard ECU 37820-PLR-C56 (2002 civic ex auto Vtec). Will the junk yard ECU Work after the immobilizer is programmed by Honda
- Power locks don't work on both passenger side doors in 2001 Honda Accord? When i lock/unlock all the doors flicking the switch up and down. Only the doors on the driver side unlock and lock. What can i do to fix this? What replacement parts do i need?
- Mechanics: Rough estimate on price to replace power window switch in Honda Accord 1996? Include rough estimate cost of parts plus labor please! Thank you **Is it possible to test if the switch needs to be replaced BEFORE checking if the motor needs to be replaced?