Removing water pump pulley in 2006 Honda Civic LX?
Accidentally hit submit on previous question.
I need to replace my belt tensioner. I have removed the alternator, but the bolts on the swiveling water pump pulley are very difficult to get to and its nearly impossible to get a good grip and remove the bolts.
I've watched videos, read forums, and looked for manuals online. No one directly explains it for the 1.8L on an '06 Civic.
I can't remove the tire/tire mount like on some cars because my water pump is positioned in a different way than most.
I need to fix my car. Any ideas on tools and whatnot? Also, I can't "remove" anything that may be in the way. The car itself is in the way.
I don't want to remove the entire pump.
Nobody cares what you want. Remove the pump.
- How can I stop water from flowing back into my Honda WB30 Water Pump 1100 LPM 80mm Outlet when the heavy duty hose attached gets blocked? I have a 1000l take of water attached to a Honda WB30 Water Pump 1100 LPM 80mm Outlet, alongside a heavy duty hose I use to water window boxes around London. When I park up the van and have to cross the road to water certain jobs, the pipe is occasionally temporarily blocked when a car runs over the hose pipe. This sends water back to the pump, and eventually breaks it. What can I do to stop the water/ pressure breaking the pump?
- Is the 1985 Honda CR 500 water pump gear shaft compatible with the 86-2001 Honda CR 500 water pump gear shaft? I have a 1985 CR 500 and the water pump gear shaft broke. It has been discontinued from Honda, and no one else has it. It is a metal gear. The one's for the 1986-2001 CR 500 are plastic. If I have to use plastic, I will. However, I prefer not to. If anyone knows where I can get the OEM 1985 Honda CR 500 gear shaft, I would forever be grateful.
- Honda Jazz won't take water in the water fill cap? I recently purchased a Honda jazz 2005 mode from a garage, top condition. I'm going on a long journey tomorrow and routinely like I would with any car I checked the water and oil levels. (cold engine). Water level was halfway between min and max so I attempted to top it up with coolant mix, however, as in poured the h20/coolant mixture into the water tank it just came straight back up as though the tank was full, although I can see it's only half full. Any ideas?
- Where I can find instructions on how to remove an A/C clutch and pulley on a 2004 Honda CR-V? I have removed the serpentine belt, the clutch plate, I'm trying to get the pulley off and I have almost succeeded except the sub frame on the front suspension is blocking the removal.