Honda Accord 2.2 Dtec clutch?
I have ta 2009 honda accord 2.2 dtec engine manual. It have 98k miles rights now. The clutch pedal is making a squeaky noise when releasing it slowly and lately its doing it more often. My mechanic put some silicone spray but id did work, also when i'm shifting the gears are not that soft like they used to be. Do i need to change clutch kit? What does the clutch kit do exactly? Found one with a good price and thought maybe i replace it. I'm asking cause i'm don't know much about mechanical.
A clutch kit usually includes a pressure plate, clutch disc, throw out bearing, and pilot shaft bearing. Not a clutch pedal. These parts are installed between the engine and transmission. If you are hearing a noise coming from inside of the car it is likely a bushing that the clutch pedal pivots on. This clutch is hydraulically operated by a master cylinder on the engine side of the firewall. If you are noticing a variation in clutch operation check the reservoir for the clutch master cylinder (refer to owner's manual). If it is losing fluid it is most likely from the slave cylinder since that is where any moisture in the system collects.
- NEED GO CART CONVERTED FROM BELT CLUTCH TO CHAIN DRIVEN CLUTCH? I have a 2 seated carter go cart with a 5.5 Honda motor and is belt driven. I'm wanting to convert it to a chain driven system but need to know how. The frame is chain driven but the clutch is belt driven how do I convert the clutch to a chain drive system.
- My Honda S2000 Clutch pedal thumps as I press down on it as if it gets stuck for a quick second. Why? I think it got worse, not when I try to Press all the way down on the gas on the free way to go fast, the RPMs shoot way faster and the MPH moves very very slowly? Any ideas?
- Honda c50 semi auto multi plate clutch? I have a Honda c50 bike with a wet type semi automatic multi plate clutch. The thing i can't understand is how the engine keeps running while on gear, in a stop, without touching the gear lever which being pressed a little releases pressure from the plates.i'd like some answers concerning the operations of such clutches.
- 1998 honda accord ex 5 speed. Clutch fluid lines? The fluid lines that come off the clutch master cylinder and slave cylinder arent normal looking lines. They don't have a hex top that i can fit a wrench on but rather look like smooth or pressed in. Any idea how to remove them?