Howmuch would an engine swap cost if they are already replacing the clutch?
I need to get my clutch replaced and considering putting a b16 into my 98 honda civic.
So i was wondering since i've heard they have to drop the engine to replace the clutch since it's FWD howmuch extra effort (in cost) would it be to swap the engine.
Labor to replace the clutch should be around $300.
Depending on the shop I would guess you would save a couple hundred dollars doing it all at once.
I would guess in the $1,000 range.
You drop the trans to do the clutch.
- Where is/are the jack point(s) on the engine in a '97 Honda CR-V, for replacing the engine and trans mounts? When replacing engine mounts in any vehicle, one step is to lift the engine slightly. On my '97 Honda CR-V, the bottom side of the engine appears to be mostly obscured by the oil pan. (Of course, trying to use the pan would result in disaster.) Images would be great… Detailed images with arrows, etc, would ROCK!
- Won't start not sure if water pump needs replacing or needs new engine? 2004 Honda civic DX 1.7L engine 155k? My car won't start i had to press the gas really hard to get it going before but now it started smoking(white) from under the hood and smelling burnt every time we try and start it up. I saw leaking under the car. Probably the coolant because its blue. Not sure if a new water pump and timing belt would do the job and or if we need to swap the entire engine. Before this I noticed that the engine would get hot or shut off whenever we stopped moving and finally this happened.
- What engines can I directly swap my D16y8 Honda motor for? It has to be more powerful and easy to swap? I have a civic with a d16y8 and its served me well but what motor could I easily swap in? I want to use the same gearbox but I don't mind swaping the ECU. The easier the swap and the more HP the better. Would prefer to use the stock manifold and intake etc.
- I'm thinking if doing a project and want to know what would be best with an engine swap? I was thinking of doing a project on a Honda civic, I have seen S2k builds and had decided that I might try to do that rather then the classic K series or B series build, sombly because of the fact I want to try and stand out. I was wondering which motor would be better, the JDM F20C, or the USDM F22C1? I had researched and the only difference I could find was displacement and torque differences. I just want to know what would respond better to mods?