Hydraulic motorcycle clutch problems?

I recently bought an 82 honda magna v45. The clutch level has no pressure, therefore won't engage. I tried bleeding it for almost an hour but bubbles just keep coming. Went through a whole bottle of fluid and can't build any pressure. Any idea what's wrong? Any advice will be appreciated

Bad seal in the master cylinder. Rebuild or replace it.

Either the master cylinder is U/S or the system needs to be properly bled. Are you sure you're bleeding it properly?

The whole lever/ cylinder is brand new

  • Will advance auto bleed my hydraulic clutch and refill it? I have a 1984 Honda magna and I was told there's air in the hydraulic line and I don't know how to bleed them I'm just wondering if advance auto can bleed and refill my line. P.s I'm leaving for a road trip in 8 hrs and really need it done
  • NEED GO CART CONVERTED FROM BELT CLUTCH TO CHAIN DRIVEN CLUTCH? I have a 2 seated carter go cart with a 5.5 Honda motor and is belt driven. I'm wanting to convert it to a chain driven system but need to know how. The frame is chain driven but the clutch is belt driven how do I convert the clutch to a chain drive system.
  • Shark Audio motorcycle problems? I have a 250w shark audio sound system For motorcycles and I had it for 2 years almost and I recently moved it from. My suzuki to my Honda cuz the suzuki wasn't operational and It worked perfectly but a day ago just decided to have a sort of glitch.makes this weird distortion noise whenever I use the AUX mode but radio works fine I've been playing my music loud but don't know what's wrong?
  • I have a 1994 honda vt1100 motorcycle possible coil problems? I was riding to work and it started sputtering. I stoped, and after a few minutes it did restart but ran very poor. Started it again and could take off both back sparkplug wires and it still ran poor. I could take off 1 of the 2 front wires and it died? I checked the resistance on both the high and low. The high was about 3.4 and i couldnt get anything from the low? So please any help would be appreciated.