2006 honda 250ex won't start?
Ok. First off the battery is good. The quad will not turn over at all. I got a new kill switch and light button. No lights come on at all, won't turn over when I hit the starter button. It will only turn over when we jump the clyinoid together. Then the lights work, and the electric started works when the quad is running. You can hill the starting switch click when the quad is running. Then the kill switch works and shuts the quad off.
Defective ignition switch.
The switch has 2 circuits.
One turns on & off the power to the ignition coils
Key on - engine runs
Key off - engine will not run
The second circuit powers all other electrical components.
When the engine is running, all of the other circuits powered by the switch, get powered by a different circuit.
That's why everything works when the engine is running.
Simple test -
Turn on the ignition switch.
Using a 12v test light, touch the black wire of the switch.
No power = bad switch.
- My 1983 Honda nighthawk 650 won't start with the electric start? I recently replaced the ignition coils because the old ones were getting heat soaked and the bike would die, however now the bike won't start with the electric start it turns over fin and the starter sounds fine but it won't start occasionally it ll start when it's cold or try to but I've been having to bump start it in order to ride it. So what's making it do this? Could it be the kill switch? Or something else?
- I have a Honda HRX217 push mower. Backfired when trying to start it, now it won't start? It was running, then I shut it off to open and close a gate, and when I went to start it again there was a really loud backfire and now it won't start. It will sound like it's almost about to start but not. Then get progressively weaker each pull. I changed the spark plug and cleaned the air filter. Any ideas?
- I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect? I have a Honda Harmony HRB215 K4 SDA that won't pull start but if I take off the recoil and drill start it, it runs perfect. I did a compressin test, the pull start only gets the mower to 60psi but the drill gets the mower to 150psi. This mower does have a decompression vale where the ehaust opest about 1/8 of the way. I tore the ead off and checked and cleaned the valves. They don't stick open. Could there be an issue with the decompression valve? Or would it be the piston rings?
- How come my atv won't electric start but will crank if I push start it? 2006 Honda trx. Doesn't have a pull rope only electric start. The starter motor turns over the engine but just won't start but I'll push it down the yard with it in gear and it will fire right up. I'm so confused by this.