How do you bleed out air lock in fuel injector system in 2001 honda civic?

How do you bleed out air lock in fuel injector system in 2001 honda civic? - 1

It's a recirculation system air locks are generally not possible

As I answered in the other question, you can cycle the ignition switch repeatedly from off to on (hold for two seconds) then back to off. After a couple minutes the air should be purged from the lines. The other way is to have a helper spray blasts of starter fluid into the intake to keep the engine running until the engine runs on its own.

Air lock? What makes you think that's the problem?
The fuel lines bleed themselves when you turn the key to the on position. The computer turns the fuel pump relay off in 10 seconds if the motor isn't running so just tun the key on for 10 seconds and then off repeating that 3 times and you should have fuel pressure.
If the cr doesn't start and there are no codes or CEL lit you'll b=need to test the fuel pressure if you're stuck thinking it's a fuel problem.
If you don't have a fuel pressure gauge t hook up try spraying a blast of starter fluid into the throttle body and starting it. If it starts for a few seconds the fuel pump is bad.
Do you realize that your vehicle has a common problem with the main relay going bad and causing a no start?
It's located under the steering column.