How many pounds of torque would i use on a stud that is 2.85 inches long?
I'm using the ARP Extended Wheel Stud for Honda/Acura
http://passwordjdm.com/ARP-Extended-Wheel-Stud-for-HondaAcura-P2487C1821.aspx
The LENGTH of the stud is immaterial. The critical factors are the stud DIAMETER and the amount of bolt stretch without exceeding the YIELD STRENGTH of the fastener. If it's a wheel stud, it's probably going to be somewhere between 75 & 100 Ft/lbs. Not sure what that translates to in the metric world. I had no luck getting the http://www.arp-bolts.com website open to check for certain.
- Which CVT transmissions use a clutch and which uses a torque converter? Lineartronic CVT Honda CVT Xtronic CVT etc What I know is that Subaru s CVT uses a clutch while Nissan CVT uses a torque converter am I right?
- Trying to adjust caster: How to convert inches to degrees? Caster on the driver side is nearly 4 degrees more than the passenger side which is in spec at 2.2. The driver side is at 5.9 positive caster and right now I'm trying to figure out the amount of washers I need to help with the issue. I looked around online and found caster spacers for honda vehicles that come in 1/8 and 1/16. How would I convert inches to degrees?
- I have a Honda GSV 190 mower engine with a broken starter rope and stud stuck in starter that I can't remove. Any ideas would be great When removing the nuts holding the recoil starter in place the nut on the front of the starter is stuck. When I try to remove it the whole stud come out of the engine. Leaving the engine cover stuck to the starter preventing me from replacing the rope. I have tried everything I can think of to remove it with no luck. Heres what it looks like. http://www.ereplacementparts.com/bolt-stud-h425mm-p-554740.html
- If in the owners manual it says I should use 5W-20 motor oil, can I use 10W-40 motor oil instead? I have a 2009 Honda Fit. I just recently bought 10W-40 and when I got home to put oil in the manual said 5W-20. What's the difference? And is it okay if I still use the 10W-40?