I have a 1994 honda prelude si. It has bent valves i don't know how many due to timing belt breaking?
I need step by step instructions on how to get to valves and to know if they are bent or not and how to replace them. Anyone help me with the step by step instructions. Please
Buy a Honda Service manual - (not chilton, or haynes) - and you will have steps, torque specs, etc. All you are going to get here is remove head, remove cam, remove valves (count bent valves). Way too many steps to explain to someone who doesn't have a clue. What you need is essentially an engine overhaul. If you need step by step instructions, I'll save you a step and recommend taking it to a good mechanic. Take it to a shop and have someone who knows what they're doing fix it. You need a good used engine. This one is beyond economic repair. If it's just the valves you need the head rebuilt but the valves may have holed the Pistons. You won't be pulling the cylinder head off and replacing all of the valves. Step by step instructions might help a mechanically inclined person but you don't sound like a person that can do a job this big.
What you need is essentially an engine overhaul. If you need step by step instructions, I'll save you a step and recommend taking it to a good mechanic.
Take it to a shop and have someone who knows what they're doing fix it.
You need a good used engine. This one is beyond economic repair. If it's just the valves you need the head rebuilt but the valves may have holed the Pistons.
You won't be pulling the cylinder head off and replacing all of the valves. Step by step instructions might help a mechanically inclined person but you don't sound like a person that can do a job this big.
- How many valves does a 2001 prelude have? How many valves does a 2001 manual trans honda prelude have? I have a toyota celica 1994 as well and on the engine it says "16 valve EFI" but how many does my prelude have?
- 2000 honda cr-v b202z engine .i replaced timing belt and now it won't idle. I set the timing. I did all the steps? 2000 honda cr-v b202z engine. I replaced timing belt and now it won't idle. I set the timing. I did all the steps?
- I have a 99 Honda civic has new distributor computer timing belt ect still want fire? I have a 99 honda civic has new distributor plugs wires computer and timing belt and all relays are good i can't figure out why it want fire turns over fine was running good but i parked it and it has been like this every since
- I have a 2000 Honda Civic with 140,000 miles on it. Do you think the timing belt has been changed? I read somewhere that they are supposed to be changed at 105,000 miles, or seven years. My car has a lot more miles than that, and twice the age. Do you think the belt has been changed before? Or is it possible it's the original belt? Would the original have lasted this long?