What do I need to finish clear coat?
I have a 2005 honda accord coupe. I recently repainted the driver side door and fender and just finished applying the final layer of clear coat. After wet sanding the orange peel, what products and tools do i need to get that high gloss finish?
A buffer with a wool pad and some kind of rubbing compound, you buff it then you switch to a polishing pad and a polishing compound to get it really nice and shiny.
check out some yoututbe videos of how to buff a car, plenty out there.
Polish and elbow grease, then wax.
If you did it properly the final coat should have ended up smooth and shiny with no sanding required, instead of orange peel. The only problem I had when I repaired and clear coated a fender is that I put it on a little too thick, to fast in one spot, and it started to sag or run a little.
- Motorcycle Vin Short, how to clear vin check? I have a 1977 Honda and the vin is not 17 digits due to it being pre 1981 so it won't clear a vin check. Any way around this?
- How long does it take for a mechanic to finish my dirtbike? About 3 weeks ago I brought my dirtbike to a Honda shop to get repaired. I payed 900 to get the clutche adjusted, valve replaced, oil change, breaks change, a full time up, and pretty much everything to make the dirtbike pretty much "brand new". It's been 3 weeks since it's been in the shop going on 4, and I'm starting to get VERY impatient. I'm just wondering how long it takes to do all of this?
- Do I need to only start the 2008 CBR600RR or do I need to operate and ride the 2008 Honda CBR600RR super sport to destinations? I was wondering about during times when the 2008 Honda CBR600RR super sport motorcycle is in storage, especially during cold winter temperatures.
- How to remove swirl marks on a cars finish? Hi, I have a black Honda crv. My main problem is I have swirl marks on my paint. I was wondering how I can remove those.