We need to know how fast does the starter spin on a 02 honda goldwing 1800?
We need to know how fast does the starter spin on a 02 honda goldwing 1800? - 1
Added (1). even if its hooked up to my truck? It still is slow. We also put a charger along with my truck and same results
Under load or no? If not loaded, a starter can spin fast enough to fly apart. I've never seen RPM specs on a starter, even for an airplane.
You sound like you have an old battery or charging problem. Possibly too small a battery.
I don't know, then. Sorry.
When its out of the bike. When we hook it up to the truck with jumper cables it turns slow just like the old one did thats why we replaced it but now the brand new one out of the box does the same thing
Under no load, just holding it in your hands, the starter should initially spin with enough force to want to jump out of your hand.
Your truck's battery isn't the problem.
It has enough power to start your truck engine.
Time for a new starter motor.
- Motorcycle starter over heated starter and only the solenoid clicked so i rebuilt the starter n tested it with a battery n it worked fine? Put it back in bike and again only the solenoid clicks… Is there a fuse for the starter or a relay i may have blown? 1988 honda hurricaine 1000F i'm ready to hang it up but the bike runs so good when it runs. i ran out of gas n kept trying to start it till battery was dead and that is how it got this way. Please and thank-you starter works fine when hooked up to a battery off the bike. what gives?
- Can't find a right rear turn signal Honda VTX 1800 N (Picture)? This is the one i need http://www.ebay.com/...1310192920 The bike has been very customized and i'm not even sure if these are custom, but i can't find them.
- If you road the Honda vtx 1300 or 1800 back in 2009 what do you ride now? - 1 What would be a modern comparison to the vtx? Has to be a cruiser. Has to be a bagger. Has to have comfortable two up riding. Has to be bellow Harley price preferably a good bit bellow.
- I have a Honda GSV 190 mower engine with a broken starter rope and stud stuck in starter that I can't remove. Any ideas would be great When removing the nuts holding the recoil starter in place the nut on the front of the starter is stuck. When I try to remove it the whole stud come out of the engine. Leaving the engine cover stuck to the starter preventing me from replacing the rope. I have tried everything I can think of to remove it with no luck. Heres what it looks like. http://www.ereplacementparts.com/bolt-stud-h425mm-p-554740.html